Brand: Peaty’s
Model: HoleShot BioFibre Tubeless Tyre Sealant
Packaging Size: 500ml / 1 Litre

Description:
Biodegradable sealing fibres
Biodegradable platelets
CO2 compatible
Seals up to 6mm holes
Operating pressures: 15 to 120 PSI
Operating temperature: -20°c to +50°c
Seals porous tyres and bead/rim gaps setup

Application:
1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles
2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants
3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim
4. Deflate the tyre and with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve
5. Re-insert the valve core and re-inflate the tyre to desired pressure
6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor
7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss
8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water
9. Check tyre pressures and ride