-
Glitch Oil – Creep (Push Bike Hub Bearing Use)
$40.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageProduct Name: Creep
Function: Maintenance oil for push bike hub bearings
Volume: 15ml
Container: Bottle with dropper
Colour: Light yellowFeatures:
– Viscosity index of 3
– Ultra-low viscosity oil, closer to water than high-spec run bike lubricants
– Ideal for running bearings at their fastest, regardless of material (ceramic or stainless steel) or shape (needle or ball bearings)
– Balanced between low viscosity and sufficient protection
– Suitable for ball bearings, metal bearings, shafts, etc.
– Applicable to spool bearings, knob ball bearings, spool shafts, and more -
Glitch Oil – Tefrosso (Push Bike Hub Bearing Use – Training)
$40.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageProduct Name: Tefrosso (PTFE Particles Compound)
Function: Maintenance oil for push bike hub bearings
Volume: 15ml
Container: Bottle with dropper
Colour: RedFeatures:
– Viscosity index of 7
– Ideal for ball bearings, metal bearings, shafts, etc.
– Suitable for spool bearings, knob ball bearings, spool shafts, and more
– Ultra-low viscosity special oil containing a high concentration of PTFE (Teflon) particles
– PTFE particles enhance heat resistance and initial movement -
Liqui Moly Bike Brake & Chain Cleaner (400ml)
$11.00 Add To CartBrand: Liqui Moly
Model: Bike Brake & Chain Cleaner
Packaging Size: 400ml
Made in GermanyDescription:
– Cleaner with specially selected combination of solvents.
– For the rapid and effective cleaning and degreasing chains and disk brakes on bicycles.
– Particularly effective on oily and greasy dirt.Application:
1. Spray generously over drive chain and catch excess fluid. Leave to dry for 10 minutes. Then treat with chain oil or chain spray.
2. Spray generously over disk brake system and catch excess fluid. Leave to dry for 10 minutes.Note: Do not use under direct heat or on hot paint surfaces.
-
Liqui Moly Bike Cleaner (1L)
$23.00 Add To CartBrand: Liqui Moly
Model: Bike Cleaner
Packaging Size: 1L
Made in GermanyDescription:
– Highly effective, biodegradable bike cleaner.
– Specially designed for extremely dirty bikes.
– Quickly dissolves and removes mud, dirt, dust, leaves, etc.
– Leaves no greasy residues and has no influence on braking effect.Application:
1. Rise off coarse contaminants with a jet of water.
2. Spray onto wet surface from approximately 30 cm away.
3. Leave for 2 to 3 minutes to take effect. Don’t leave the cleaner on the bike for much longer than the recommended time.
4. Rinse off bicycle with clear water and dry it off.Note: Do not use under direct heat or on hot paint surfaces.
-
Liqui Moly Bike Gloss Spray Wax (400ml)
$25.00 Add To CartBrand: Liqui Moly
Model: Bike Gloss Spray Wax
Packaging Size: 400ml
Made in GermanyDescription:
– Cleans and preserves bicycles.
– Gives all paint and color finishes a smooth surface with a brilliant shine and outstanding depth of color after easily polishing.
– The protective layer left behind smooths out scratches and protects the paint from the weather.
– Light road grime and greasy contaminants can be removed quickly and easily without making scratches.Application:
1. Surfaces which are heavily contaminated must be thoroughly cleaned with ‘Bike Cleaner’ and dried before treatment.
2. Then spray on a thin coat of Bike Gloss Spray Wax, let dry and polish with a soft rag or microfiber cloth. -
Liqui Moly Bike LM40 Muti-Purpose Spray (50ml)
$10.00 Add To CartBrand: Liqui Moly
Model: Bike LM40 Muti-Purpose Spray
Packaging Size: 50ml
Made in GermanyDescription:
– Combination of active agents for universal use.
– Provides outstanding protection against corrosion, displaces water, dissolves rust and dirt and delivers excellent lubrication.
– Its outstanding penetrative capacity enables it to reach even the most confined spaces and reliably eliminate squealing noises.
– Does not react with plastics, paints or metals.Application:
1. Apply thinly and evenly onto the previously cleaned and dried surface. Provides a visible protective film.Note: Do not use under direct heat or on hot paint surfaces.
-
Liqui Moly Rapid Cleaner (Degreaser) (500ml)
$10.60 Add To CartBrand: Liqui Moly
Model: Rapid Cleaner (Degreaser)
Packaging Size: 500ml
Made in GermanyDescription:
– Makes assembly work easier, cleaner and safer.
– Removes oil, grease, and dirt quickly and completely.
– Parts treated will be completely free of residues and fully degreased.
– Removes resin, oil and grease residues.
– Excellent penetration, controlled evaporation, free of residues.Application:
1. Spray contaminated components and allow to drain.
2. After the solvent has evaporated, the components will be clean and free from grease. -
Peaty’s Disc Brake Cleaner (400ml)
$16.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageBrand: Peaty’s
Model: Disc Brake Cleaner
Packaging Size: 400mlFeatures:
– Improves braking performance
– Dissolves greases and oils
– Re-conditions brake pads
– Reduces brake squeal
– Carbon safe
– Readily biodegradable formula
– 400ml of product in a compact can
– Colour coded ring for easy worktop identification
– For use on all functional components in brake assemblies, including calipers, discs and padsApplication:
1. Shake can thoroughly before use.
2. Place a drip tray underneath the work area.
3. Spray liberally onto the surface to be treated and allow the contaminated liquid to drain into the tray. Agitation with a brush will assist in the removal of stubborn contamination.
4. Blast parts again until all contamination has been removed then wipe away any excess deposits with a soft absorbent cloth. -
Peaty’s HoleShot BioFibre Tubeless Tyre Sealant (500ml / 1 Litre)
$30.00 – $48.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageBrand: Peaty’s
Model: HoleShot BioFibre Tubeless Tyre Sealant
Packaging Size: 500ml / 1 LitreFeatures:
– Biodegradable sealing fibres
– Biodegradable platelets
– CO2 compatible
– Seals up to 6mm holes
– Operating pressures: 15 to 120 PSI
– Operating temperature: -20°c to +50°c
– Seals porous tyres and bead/rim gaps setupApplication:
- Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles
- Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants
- Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim
- Deflate the tyre and with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve
- Re-insert the valve core and re-inflate the tyre to desired pressure
- Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor
- Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss
- Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water
- Check tyre pressures and ride
-
Peaty’s Protect & Shine Spray (400ml)
$16.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageDESCRIPTION
Brand: Peaty’s
Model: Protect & Shine Spray
Packaging Size: 400mlFeatures:
– Bike bling for a race-ready finish
– Helps reduce dirt & mud cling
– Reduces suspension friction
– Protects rubber seals
– Safe for use on metal parts, paintwork, plastic and carbonApplication:
1. Shake thoroughly before use. Apply from a distance of 10-20cm onto a clean dry surface.
2. Wipe the surface with a soft cloth then buff until it sparkles.
3. To avoid overspray and brake contamination, apply directly to a cloth at a safe distance then transfer to the surface.Caution: Do not apply to brake components and tyre treads.
-
Peaty’s PT17 General Maintenance Spray (400ml)
$13.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageBrand: Peaty’s
Model: PT17 General Maintenance Spray
Packaging Size: 400mlFeatures:
– Lubricates & protects
– Drives out moisture & Grime
– Prevents Rust and corrosion
– Helps reduce dirt & mud cling
– Frees up seized parts
– Readily biodegradable & PTFE free
– Safe for use on all metal parts, paintwork, rubber, plastic and carbonApplication:
1. Shake can thoroughly before use.
2. Spray directly onto the component or surface from a distance of 15 to 25cm.
3. Leave for up to 60mins to fully penetrate or form a film.Caution: Do not apply to brake components and tyre treads.
-
Rock N Roll Absolute Dry Chain Lubricant (4oz/117ml)
$19.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageFeatures:
– Absolute Dry lube is for road bikes
– Shake well and apply a stream of lube to the chain at the cassette
– Get the chain really wet, this lube cleans and lubes all in one
– Freewheel the chain backwards for about 5 seconds, no less.
– Wipe off all the excess lube
– 117ml (4oz) drip bottle -
Rock N Roll Gold Chain Lubricant (4oz/117ml)
$19.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageFeatures:
– Gold lube is the all-rounder chain lubricant for both mountain and road bikes
– Shake well and apply a stream of lube to the chain at the cassette
– Get the chain really wet, this lube cleans and lubes all in one
– Freewheel the chain backward for about 5 seconds, no less.
– Wipe off all the excess lube
– 117ml (4oz) -
Squirt Long Lasting Chain Lube (4oz/120ml)
$19.00 Add To Cart This product has multiple variants. The options may be chosen on the product pageBrand: Squirt
Model: Long Lasting Chain Lube
Packaging Size: 120mlSquirt Long Lasting Chain Lube is what every cyclist wants: a long-lasting dry chain lube that does not gather dirt. The first successful biodegradable wax/water emulsion containing as much wax as needed to last for the duration of a marathon ride. It prolongs the life of your drivetrain by reducing friction while improving shifting and reducing irritating dry chain noise. No degreasing is required for repeat use. If needed, your chain can be cleaned with a clean, dry brush.
– Excellent for wet & dry conditions
– Stays clean
– Reduces chain noise & chainsuck
– Biodegradable, PFAS-free formula, Solvent-free
– For use on all bicycle chain typesDirections:
Initial Application:
Remove factory grease and other lubricants completely. Follow the application instructions below and repeat after 5 minutes.Repeat Application:
Shake bottle and apply to inside of Dry Chain while turning the cranks. Do not wipe off. Allow chain to dry completely before cycling, especially in wet conditions. Do not degrease again.
